After the licensed asbestos removalist has completed asbestos removal work, the person who commissioned the asbestos removal work must make sure a clearance inspection is carried out and a clearance certificate is issued before the area can be reoccupied. This inspection is completed by an Asbestos Assessor. Chemsafety has eight Asbestos Assessors who work on your behalf to ensure the removal has been completed to the asbestos removal control plan.
During and after the removal of asbestos containing products the WorkSafe guidelines state that an independent assessor is required to do an asbestos clearance assessment. This is undertaken by air monitoring, swab sampling and visual inspections for Class A friable asbestos products or surveillance air monitoring and a visual inspection for Class B non-friable asbestos products.
Once you have had the sample tested and you have contacted your asbestos removalist they will let you know whether the removal will be done as a Class A or B. Class A refers to friable asbestos products such as stipple, paper backed vinyl and lath & plaster. Class B refers to non-friable products such as roofing tiles, cement board and soffits.
If there is significant contamination on site before the start of the removal, the removalist may require us to undertake air monitoring to see if the area is safe to commence work.
For a Class A removal clearance we set up a pump on the exterior of the removalists enclosure to ensure that no fibres are being released from the negative air unit.
Once the asbestos removal is complete the inner lining of the enclosure is wrapped up, sealed and taken out with the removed asbestos materials. We then set up air monitoring and undertake swab sampling and a visual assessment of the removal area to ensure that all the asbestos materials and debris have been removed following the method stated on the removalists removal plan. We look at the air monitoring and swab sample results to ensure they are below guidelines.
Once the enclosure has been removed completely, we do a final inspection to ensure there is no dust or debris to ensure the property is safe for re-occupation.
For a Class B removal clearance there is usually no enclosure and is sometimes exterior. In this case we set up surveillance monitoring around the removal site and undertake a final visual inspection of the removal area upon completion.
We will discuss our findings with the removalist and once they have completed their remediation of the area new air monitoring or a visual inspection will be undertaken depending on when in the process it was found.
We have our own in house IANZ accredited laboratory which means you will receive your results within the same day which keeps the project on track.
We will send you a copy of the report that is also sent to the removalist. Upon completion you will receive a Clearance Certificate that states, based on our assessment and results, that we have found it safe for re-occupation.
I have found Chemsafety takes a really practical approach to their work and most importantly deliveries exactly what they said they would by when they said they would.